Institute of Multipurpose Utilization of Mineral Resources, Chinese Academy of Geological SciencesHost
2024 No. 1
Article Contents

XING Zhibing, HAN Fenglan, LI Maohui, YANG Baoguo, ZHENG Bin, LIU Tengteng. Mechanical Grinding Characteristics of Water Quenched Si-Manganese Slag[J]. Multipurpose Utilization of Mineral Resources, 2024, 45(1): 174-180. doi: 10.3969/j.issn.1000-6532.2024.01.023
Citation: XING Zhibing, HAN Fenglan, LI Maohui, YANG Baoguo, ZHENG Bin, LIU Tengteng. Mechanical Grinding Characteristics of Water Quenched Si-Manganese Slag[J]. Multipurpose Utilization of Mineral Resources, 2024, 45(1): 174-180. doi: 10.3969/j.issn.1000-6532.2024.01.023

Mechanical Grinding Characteristics of Water Quenched Si-Manganese Slag

More Information
  • This is an article in the field of mineral processing engineering. According to the principle of mechanochemistry, the water-quenched silico-manganese slag is ground by vibrating mill. The effect of grinding time on the specific surface area, particle size distribution and activity evaluation of the water-quenched silico-manganese slag is studied, and the specific surface area is used. The specific surface area, particle size distribution, phase analysis and particle morphology of water-quenched silico-manganese slag powder were discussed with laser particle size analyzer, XRD and SEM and other characterization methods. At the same time, the water with different grinding time was also studied. Effect of silicomanganese slag powder as admixture on the compressive strength of geopolymers. The results show that with the extension of the grinding time, the particle size distribution of the silicomanganese slag gradually shifts to the left, the particle size is gradually refined, and the quartz phase gradually changes to an amorphous structure. From the perspective of cost, when the grinding time is 25 min and the specific surface area is 1.8281 m2/g as fly ash geopolymer admixture, the 28 d compressive strength can reach 26.79 MPa. And it is determined that the difficult-to-wear phase is the orthomanganese pyroxene crystal structure, and different manganese-containing phases.

  • 加载中
  • [1] 李胜春, 朱春江, 宁伟. 最新固废利用热态熔渣生产优质矿棉的研究和应用[C]. 2019第22届全国玻璃窑炉技术研讨交流会, 2019: 12.LI S C, ZHU C J, NING W. Research and application of the latest solid waste to use hot molten slag to produce high-quality mineral wool [C]. 2019 22nd National Glass Furnace Technology Seminar, 2019: 12.

    Google Scholar

    LI S C, ZHU C J, NING W. Research and application of the latest solid waste to use hot molten slag to produce high-quality mineral wool [C]. 2019 22nd National Glass Furnace Technology Seminar, 2019: 12.

    Google Scholar

    [2] 窦林瑞. 浅谈硅锰渣在建筑材料中的利用[J]. 中国锰业, 2017, 35(4):136-138.DOU L R. Discussion on the utilization of silicomanganese slag in building materials[J]. China Manganese Industry, 2017, 35(4):136-138.

    Google Scholar

    DOU L R. Discussion on the utilization of silicomanganese slag in building materials[J]. China Manganese Industry, 2017, 35(4):136-138.

    Google Scholar

    [3] 崔孝炜, 狄燕清, 南宁. 钢渣的机械力粉磨特性[J]. 矿产保护与利用, 2017(5):77-81.CUI X W, DI Y Q, NAN N. Mechanical grinding characteristics of steel slag[J]. Mineral Resources Protection and Utilization, 2017(5):77-81.

    Google Scholar

    CUI X W, DI Y Q, NAN N. Mechanical grinding characteristics of steel slag[J]. Mineral Resources Protection and Utilization, 2017(5):77-81.

    Google Scholar

    [4] 崔孝炜, 狄燕清, 邓婉心, 等. 铁尾矿机械力粉磨特性的基础研究[J]. 非金属矿, 2020, 43(1):73-75.CUI X W, DI Y Q, DENG W X, et al. Basic research on mechanical grinding characteristics of iron tailings[J]. Nonmetallic Minerals, 2020, 43(1):73-75.

    Google Scholar

    CUI X W, DI Y Q, DENG W X, et al. Basic research on mechanical grinding characteristics of iron tailings[J]. Nonmetallic Minerals, 2020, 43(1):73-75.

    Google Scholar

    [5] 饶磊, 吴六顺, 周云, 等. 高温改性及风淬处理对钢渣易磨性影响的工业性试验研究[J]. 炼钢, 2017, 33(6):73-77.RAO L, WU L S, ZHOU Y, et al. Industrial test research on effect of high temperature modification and air quenching treatment on the grindability of steel slag[J]. Steelmaking, 2017, 33(6):73-77.

    Google Scholar

    RAO L, WU L S, ZHOU Y, et al. Industrial test research on effect of high temperature modification and air quenching treatment on the grindability of steel slag[J]. Steelmaking, 2017, 33(6):73-77.

    Google Scholar

    [6] 杨南如. 非传统胶凝材料化学[M]. 武汉: 武汉理工大学出版社, 2017: 76-77.YANG N R. The Chemistry of unconventional cementitious materials[M]. Wuhan: Wuhan University of Technology Press, 2017: 76-77.

    Google Scholar

    YANG N R. The Chemistry of unconventional cementitious materials[M]. Wuhan: Wuhan University of Technology Press, 2017: 76-77.

    Google Scholar

    [7] 赵计辉. 钢渣的粉磨/水化特征及其复合胶凝材料的组成与性能[D]. 北京: 中国矿业大学(北京), 2015.ZHAO J H. Grinding/hydration characteristics of steel slag and the composition and properties of composite cementitious materials[D]. Beijing: China University of Mining and Technology (Beijing), 2015.

    Google Scholar

    ZHAO J H. Grinding/hydration characteristics of steel slag and the composition and properties of composite cementitious materials[D]. Beijing: China University of Mining and Technology (Beijing), 2015.

    Google Scholar

    [8] 刘璇, 李如燕, 崔孝炜, 等. 机械力对高硅金尾矿粒度及活性的影响[J]. 中国粉体技术, 2019, 25(2):42-46.LIU X, LI R Y, CUI X W, et al. The effect of mechanical force on the particle size and activity of high-silicon gold tailings[J]. China Powder Science and Technology, 2019, 25(2):42-46.

    Google Scholar

    LIU X, LI R Y, CUI X W, et al. The effect of mechanical force on the particle size and activity of high-silicon gold tailings[J]. China Powder Science and Technology, 2019, 25(2):42-46.

    Google Scholar

    [9] 王晨, 高宏, 刘淑红, 等. 中低品位磷矿粉的机械力化学活化与活性表征[J]. 化工矿物与加工, 2012, 41(7):1-4+8.WANG C, GAO H, LIU S H, et al. Mechanochemical activation and activity characterization of middle and low grade phosphate rock powder[J]. Industrial Minerals and Processing, 2012, 41(7):1-4+8.

    Google Scholar

    WANG C, GAO H, LIU S H, et al. Mechanochemical activation and activity characterization of middle and low grade phosphate rock powder[J]. Industrial Minerals and Processing, 2012, 41(7):1-4+8.

    Google Scholar

    [10] 郑伟亮, 盖国胜. 不同粉碎方式对物料粉碎的研究[C]. 第九届全国粉体工程学术会暨相关设备、产品交流会, 2003: 3.ZHENG W L, GAI G S. Research on material crushing by different crushing methods[C]. The 9th National Powder Engineering Conference and Related Equipment and Products Exchange Conference, 2003: 3.

    Google Scholar

    ZHENG W L, GAI G S. Research on material crushing by different crushing methods[C]. The 9th National Powder Engineering Conference and Related Equipment and Products Exchange Conference, 2003: 3.

    Google Scholar

    [11] He T, Li Z, Zhao S, et al. Study on the particle morphology, powder characteristics and hydration activity of blast furnace slag prepared by different grinding methods[J]. Construction and Building Materials, 2021, 270.

    Google Scholar

    [12] Okada K, Kameshima Y, Yasumori A. Chemical shifts of silicon X‐ray photoelectron spectra by polymerization structures of silicates[J]. Journal of the American Ceramic Society, 2010, 81(7):1970-1972.

    Google Scholar

    [13] 张娜, 刘晓明, 孙恒虎. 赤泥-煤矸石基胶凝材料水化过程XPS分析[J]. 金属矿山, 2014(3):171-176.ZHANG N, LIU X M, SUN H H. XPS analysis of hydration process of red mud-gangue based cementitious material[J]. Metal Mine, 2014(3):171-176.

    Google Scholar

    ZHANG N, LIU X M, SUN H H. XPS analysis of hydration process of red mud-gangue based cementitious material[J]. Metal Mine, 2014(3):171-176.

    Google Scholar

  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Figures(10)

Tables(5)

Article Metrics

Article views(921) PDF downloads(101) Cited by(0)

Access History

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint