| Citation: |
GONG Hui, GUO Nana, GE Bangyun. Application and research on large in-situ self-reacting direct shear apparatus owning two shear interfaces[J]. Hydrogeology & Engineering Geology, 2021, 48(5): 168-175. doi: 10.16030/j.cnki.issn.1000-3665.202012039
|
Application and research on large in-situ self-reacting direct shear apparatus owning two shear interfaces
-
Abstract
The in-situ shear test has been justified as one of the most reliable and common method used to test shear strength of soil-rock mixture. However, the existing in-situ shear test apparatuses show some shortcomings in practice that will influence the accuracy of the test results, including the unreasonable normal pressure system and unable to reserve shear opening, etc. A new self-reacting direct shear apparatus owning two shear interfaces is introduced. The apparatus is characterized by the followings: (1) it provides horizontal reaction force by itself; (2) the vertical pressure system is fixed during shearing without roller row; (3) the adjustable width of shear opening can be reserved between shear boxes; (4) it is of high modularity, and is easy to handle, assembly and disassembly. It is validated through comparison with the single-box direct shear test. Compared with the experimental results obtained by the single box shear apparatus, the shear stress-shear displacement curve obtained by the self-reacting direct shear apparatus is a standard hyperbolic curve, and the shear stress-displacement curve under large shear displacement can be obtained. The maximum shear stress read by shear stress-displacement curve under large shear displacement is more practical. Compared with the shear strength obtained by the single-ring shear apparatus, the internal friction angle is 4.6 degree lower and the cohesion is 41.14 kPa higher. At the same time, through the image comparison of the shear failure surface obtained by the two shear apparatuses, it can be obviously found that the shear failure interfaces obtained by self-reacting direct shear apparatus owning two shear interfaces is relatively flat, and there is no concave phenomenon of the shear failure surface on the single-ring shear instrument.
-
Keywords:
- in-situ test /
- large direct shear test /
- two shear interfaces
-
-
References
[1] 徐文杰, 胡瑞林, 岳中琦, 等. 基于数字图像分析及大型直剪试验的土石混合体块石含量与抗剪强度关系研究[J]. 岩石力学与工程学报,2008,27(5):996 − 1007. [XU Wenjie, HU Ruilin, YUE Zhongqi, et al. Research on relationship between rock block proportion and shear strength of soil-rock mixtures based on digital image analysis and large direct shear test[J]. Chinese Journal of Rock Mechanics and Engineering,2008,27(5):996 − 1007. (in Chinese with English abstract) doi: 10.3321/j.issn:1000-6915.2008.05.016 [2] 罗丽娟, 赵法锁, 陈新建, 等. 巨型黄土滑坡剪出口滑带土的原位剪切试验研究[J]. 西安科技大学学报,2009,29(4):459 − 464. [LUO Lijuan, ZHAO Fasuo, CHEN Xinjian, et al. In situ shear experiment on the shear crack of giant loess landslide[J]. Journal of Xi’an University of Science and Technology,2009,29(4):459 − 464. (in Chinese with English abstract) doi: 10.3969/j.issn.1672-9315.2009.04.019 [3] 张勇, 魏玉峰, 程英建. 一种软弱带土的原位直剪仪: CN104807706 A[P]. 2015-07-29. ZHANG Yong, WEN Yufeng, CHEN Yingjian. A insitu-shear equipment for weak soil: CN104807706 A[P]. 2015-07-29. (in Chinese) [4] 黄斌, 程展林, 饶锡保, 等. 一种粗粒土现场大型直剪试验设备: CN203858163U[P]. 2014-10-01. HUANG Bin, CHENG Zhanlin, RAO Xibao, et al. Large direct shear field test equipment for coarse-grained soil: CN203858163U[P]. 2014-10-01. (in Chinese) [5] 杨雄, 程小俊, 何忠意. 原位直剪试验装置的优化研究及应用[J]. 江西理工大学学报,2012,33(3):30 − 33. [YANG Xiong, CHENG Xiaojun, HE Zhongyi. Research on the optimization of field direct shear test apparatus and its application[J]. Journal of Jiangxi University of Science and Technology,2012,33(3):30 − 33. (in Chinese with English abstract) [6] 晏鄂川, 胡学军, 文国军, 等. 一种大型岩土体原位直剪试验装置: CN105806721A[P]. 2016-07-27. YAN Echuan, HU Xuejun, WEN Guojun, et al. Large rock-soil mass in situ direct shear testing apparatus: CN105806721A[P]. 2016-07-27. (in Chinese) [7] 董云, 柴贺军, 杨慧丽. 土石混填路基原位直剪与室内大型直剪试验比较[J]. 岩土工程学报,2005,27(2):235 − 238. [DONG Yun, CHAI Hejun, YANG Huili. Comparison of shear test in site and lab large-scale shear test for rock-soil aggregate of roadbed[J]. Chinese Journal of Geotechnical Engineering,2005,27(2):235 − 238. (in Chinese with English abstract) doi: 10.3321/j.issn:1000-4548.2005.02.021 [8] 李长隆, 李军, 金嗣淳, 等. 原位直剪仪: CN104977216A[P]. 2015-10-14. LI Changlong, LI Jun, JIN Sichun, et al. In situ direct shear apparatus: CN104977216A[P]. 2015-10-14. (in Chinese) [9] 刘斯宏, 臧德记. 便携式现场和室内两用直剪试验仪及其取样测试方法: CN101105433[P]. 2008-01-16. LIU Sihong, ZANG Deji. Portable on-spot and indoor dual-purpose direct-cutting experiment instrument and its sampling method: CN101105433[P]. 2008-01-16. (in Chinese) [10] 闵弘, 刘小丽, 魏进兵, 等. 现场室内两用大型直剪仪研制(I): 结构设计[J]. 岩土力学,2006,27(1):168 − 172. [MIN Hong, LIU Xiaoli, WEI Jinbing, et al. A new large direct shear apparatus for field and laboratory test (I): configuration[J]. Rock and Soil Mechanics,2006,27(1):168 − 172. (in Chinese with English abstract) doi: 10.3969/j.issn.1000-7598.2006.01.034 [11] 杨文智, 鲁先龙, 苏荣臻, 等. 一种剪切自平衡原位直剪仪: CN105758736 A[P]. 2016-07-13. YANG Wenzhi, LU Xianlong, SU Rongzhen, et al. A self balancing field direct shearing equipment: CN105758736 A[P]. 2016-07-13. (in Chinese) [12] 张清照, 沈明荣, 丁文其. 结构面在剪切状态下的力学特性研究[J]. 水文地质工程地质,2012,39(2):37 − 42. [ZHANG Qingzhao, SHEN Mingrong, DING Wenqi. Study on the mechanical properties of rock mass discontinuity under shear condition[J]. Hydrogeology & Engineering Geology,2012,39(2):37 − 42. (in Chinese with English abstract) [13] 朱小明, 刘博, 王长柏, 等. 含二阶规则起伏体结构面的剪切试验研究[J]. 水文地质工程地质,2011,38(3):38 − 41. [ZHU Xiaoming, LIU Bo, WANG Changbai, et al. A study of shearing tests of structural plane with regular second-order asperities[J]. Hydrogeology & Engineering Geology,2011,38(3):38 − 41. (in Chinese with English abstract) doi: 10.3969/j.issn.1000-3665.2011.03.007 [14] 王光进, 杨春和, 张超, 等. 粗粒含量对散体岩土颗粒破碎及强度特性试验研究[J]. 岩土力学,2009,30(12):3649 − 3654. [WANG Guangjin, YANG Chunhe, ZHANG Chao, et al. Experimental research on particle breakage and strength characteristics of rock and soil materials with different coarse-grain contents[J]. Rock and Soil Mechanics,2009,30(12):3649 − 3654. (in Chinese with English abstract) doi: 10.3969/j.issn.1000-7598.2009.12.015 [15] 翁厚洋, 朱俊高, 余挺, 等. 粗粒料缩尺效应研究现状与趋势[J]. 河海大学学报(自然科学版),2009,37(4):425 − 429. [WENG Houyang, ZHU Jungao, YU Ting, et al. Status quo and tendency of studies on scale effects of coarse-grained materials[J]. Journal of Hohai University (Natural Sciences),2009,37(4):425 − 429. (in Chinese with English abstract) [16] JEWELL R A. Direct shear tests on sand[J]. Géotechnique,1989,39(2):309 − 322. [17] 中华人民共和国国家发展和改革委员会. 水电水利工程粗粒土试验规程: DL/T 5356—2006[S]. 北京: 中国电力出版社, 2007. National Development and Reform Commission. Code for coarse - grained soil tests for hydropower and water conservancy engineering: DL/T 5356—2006[S]. Beijing: China Electric Power Press, 2007. (in Chinese) [18] 龚辉, 尚思良, 徐炎兵, 等. 一种获取岩土体强度参数的原位剪切装置及安装方法: CN106198257A[P]. 2016-12-07. GONG Hui, SHANG Siliang, XU Yanbing, et al. In-situ shearing device capable of acquiring strength parameters of rock-soil body and mounting method: CN106198257A[P]. 2016-12-07. (in Chinese) -
Access History
Figures(14)
Export File
Citation
GONG Hui, GUO Nana, GE Bangyun. Application and research on large in-situ self-reacting direct shear apparatus owning two shear interfaces[J]. Hydrogeology & Engineering Geology, 2021, 48(5): 168-175. doi: 10.16030/j.cnki.issn.1000-3665.202012039
Format
Content
DownLoad:
-
Figure 1.
Schematic diagrams of the single-box direct shear instrument
-
Figure 2.
Schematic diagram of common double-box direct shear instrument
-
Figure 3.
Schematic diagram of the self-balanced double-box direct shear instrument
-
Figure 4.
Actual shear failure interface
-
Figure 5.
Stresses and couples induced by shear force
-
Figure 6.
Front view and photo for the large self-reacting direct shear apparatus owning two shear interfaces
-
Figure 7.
Schematic diagram of side rail
-
Figure 8.
Diagram of force（stresses）for shear boxes and test samples
-
Figure 9.
Field sample modification diagram of new shear apparatus application
-
Figure 10.
Shear stress-displacement curves for the single-box shear apparatus
-
Figure 11.
Shear stress-displacement curves for new shear apparatus self-reacting direct shear owning two shear interfaces
-
Figure 12.
Compassion between strength parameter fittings of two shear apparatuses
-
Figure 13.
Shear failure interface attained through the single box apparatus
-
Figure 14.
Shear failure interface attained through self-balanced in-situ shear equipment owning two shear interfaces