Wei-yi XIE, Yan SHEN, Li-li LI, Yong-gang ZHAO. Determination of the Distribution of Uranium in Glass Solidified Samples by Secondary Ionization Mass Spectrometry[J]. Rock and Mineral Analysis, 2016, 35(6): 579-584. doi: 10.15898/j.cnki.11-2131/td.2016.06.003
Citation: |
Wei-yi XIE, Yan SHEN, Li-li LI, Yong-gang ZHAO. Determination of the Distribution of Uranium in Glass Solidified Samples by Secondary Ionization Mass Spectrometry[J]. Rock and Mineral Analysis, 2016, 35(6): 579-584. doi: 10.15898/j.cnki.11-2131/td.2016.06.003
|
Determination of the Distribution of Uranium in Glass Solidified Samples by Secondary Ionization Mass Spectrometry
More Information
-
Corresponding author:
Yong-gang ZHAO, zhaoyg@ciae.ac.cn
-
Abstract
Glass solidification is a common method for curing highly radioactive waste liquid. This method has the advantages of high resistance to chemical corrosion, and good radiation, thermal, and mechanical stability. However, the disadvantage is the decline of resistance to water leaching so that the reliability of the result needs to be confirmed by an anti-leaching test. Using Secondary Ionization Mass Spectrometry (SIMS) to analyze the composition distribution and leaching behavior of radioactive components (such as uranium) in the solid glass is a method for evaluating the ability of resistance to leaching of solidified glass. The simulated glass solidified sample was tested by SIMS and the results are reported and discussed in this paper. Carbon was used as the coating material during vacuum evaporation coating on the surface of the sample in order to overcome the poor conductivity of the sample. The isotopic composition of natural uranium is about 7.3‰. And the ratio of 235U/238U in the prepared solid glass is 7.9‰±0.395‰. The research indicates that the method can determine the measurement of the isotopic abundance of uranium and directly show its distribution. This method can provide technical support for the study of the leaching behavior of radioactive elements in solidified glass samples.
-
-
References
[1] |
徐凯.核废料玻璃固化国际研究进展[J].中国材料进展,2016,35(7):481-488.
Google Scholar
Xu K. Review of International Research Progress on Nuclear Waste Vitrification[J].Materials China, 2016,35(7):481-488.
Google Scholar
|
[2] |
金立云,李云,高月英.X射线荧光光谱法测定模拟高放废液玻璃固化体中14种主、次量元素[J].原子能科学技术,1995,29(2):154-159.
Google Scholar
Jin L Y,Li Y,Gao Y Y.Determination of 14 Major and Minor Elements in the Simulated High-level Liquid Waste Solidified Glass by XRF[J].Atomic Energy Science and Technology,1995,29(2):154-159.
Google Scholar
|
[3] |
华小辉,王雷,游新锋,等.放射性废物处理技术进展——模拟高放玻璃固化体处置行为研究[J].中国原子能科学研究院年报,2015:47.
Google Scholar
Hua X H,Wang L,You X F,et al.Radioactive Waste Treatment Technology Progress——Research on Simulated High-level Liquid Waste Solidified Glass Disposal Behavior[J].Annual Report of China Institute of Atomic Energy,2015:47.
Google Scholar
|
[4] |
张华,Aertsens M,Van Iseghem P.SON68玻璃固化体腐蚀层SIMS分析的模型计算[J].中国原子能科学研究院年报,2010:282.
Google Scholar
Zhang H,Aertsens M,Van Iseghem P.Fitting of SIMS Profiles of Glasses SON68 Altered in Corrosion Clay[J].Annual Report of China Institute of Atomic Energy,2010:282.
Google Scholar
|
[5] |
李洪辉,李鹏,贾梅兰,等.玻璃固化体中239Pu、237Np、241Am、238U核素迁移计算[J].环境科学与技术,2015,38(12Q):108-115.
Google Scholar
Li H H,Li P,Jia M L, et al.Calculation of Nuclide Migration Model of 239Pu,237Np,241Am,238U in Vitrified Waste[J].Environmental Science & Technology,2015,38(12Q):108-115.
Google Scholar
|
[6] |
迟婷婷.扫描电子显微镜对样品的要求及其制备[J].中国计量,2015(8):83.
Google Scholar
Chi T T.Requirement and Preparation of Sample of Scanning Electron Microscope[J].China Metrology,2015(8):83.
Google Scholar
|
[7] |
Eby N,Hermes R,Charnley N,et al.Trinitite-The Atomic Rock[J].Geology Today,2010,26(5):180-185. doi: 10.1111/gto.2010.26.issue-5
CrossRef Google Scholar
|
-
-
Access History