Study on Ultrafine Grinding of Quartz with Coal Based Carbon

PAN Dong; YANG Jianguo; GE Yuan; CHEN Peng; LI Song

doi:10.13779/j.cnki.issn1001-0076.2018.05.013

2018 Vol. 38, No. 5

Article Contents

Article navigation > Conservation and Utilization of Mineral Resources > 2018 > (5): 106-109, 150

Next Article Previous Article

PAN Dong, YANG Jianguo, GE Yuan, CHEN Peng, LI Song. Study on Ultrafine Grinding of Quartz with Coal Based Carbon[J]. Conservation and Utilization of Mineral Resources, 2018, (5): 106-109, 150. doi: 10.13779/j.cnki.issn1001-0076.2018.05.013

Citation:

PAN Dong, YANG Jianguo, GE Yuan, CHEN Peng, LI Song. Study on Ultrafine Grinding of Quartz with Coal Based Carbon[J]. Conservation and Utilization of Mineral Resources, 2018, (5): 106-109, 150. doi: 10.13779/j.cnki.issn1001-0076.2018.05.013

Study on Ultrafine Grinding of Quartz with Coal Based Carbon

1.
Liupanshui Normal University, School of Chemistry and Materials Engineering, Liupanshui 553004, China
2.
National Engineering Research Center of Coal Preparation and Purification, China University of Mining and Technology, Xuzhou 221116, China

Received Date: 16 July 2018

Publish Date: 25 October 2018

Abstract

Abstract

Under dry conditions, quartz was used as a grinding aid to perform ultrafine pulverization tests on coal-based carbon. The effect of the amount of quartz and the mode of addition on the ultrafine pulverization of coal-based carbon was studied. From the perspective of crushing dynamics, the regulation of the different addition methods of quartz grinding aids for ultrafine grinding of coal-based carbon was analyzed. The results showed that with the increase of the amount of quartz, the median diameter D₅₀ of the coal based carbon powder first decreased and then tended to be unchanged. When the amount was 1.4 g, the D₅₀ of the powder was reduced to 3.21 μm. Among the three methods of adding grinding agent, it was found that the grinding rate was higher when the grinding aid was added only before grinding, which was suitable for long time grinding situations. However, when the grinding aid was added incrementally in the grinding process, the grinding rate changed faster and it was suitable for short time grinding situations.
- coal based carbon /
- ultrafine grinding /
- grinding aid /
- grinding rate /
- crushing dynamics

FullText(HTML)

References

[1]	王怀.助磨剂对矿石粉碎特性的影响及其作用机理研究[D].沈阳: 东北大学, 2013. Google Scholar
[2]	赵静, 付晓恒, 王婕, 等.超细粉碎方式对超净煤分选效果的影响[J].煤炭学报, 2016, 41(12):3108-3114. Google Scholar
[3]	王觅堂, 李梅, 柳召刚, 等.超细粉体的团聚机理和表征及消除[J].中国粉体技术, 2008(3):46-51, 59. doi: 10.3969/j.issn.1008-5548.2008.03.012 CrossRef Google Scholar
[4]	刁雄.超细分级机颗粒预分散及应用研究[D].绵阳: 西南科技大学, 2013. Google Scholar
[5]	陶昊, 黄建国, 施剑林.水泥助磨剂的研究进展[J].材料导报, 2013, 27(17):105-109. doi: 10.3969/j.issn.1005-023X.2013.17.023 CrossRef Google Scholar
[6]	张玉德, 康小娟, 谭金龙, 等.煤基功能性填料的研究进展[J].化工新型材料, 2013, 41(7):3-5. doi: 10.3969/j.issn.1006-3536.2013.07.002 CrossRef Google Scholar
[7]	谭超兵.助磨剂在云母超细磨矿中的应用[J].矿产保护与利用, 2003(4):19-21. doi: 10.3969/j.issn.1001-0076.2003.04.006 CrossRef Google Scholar
[8]	潘东, 杨建国, 石开仪, 等.采用高硬度助磨剂对煤基碳素进行超细粉碎的试验研究[J].煤炭技术, 2017, 36(1):315-317. Google Scholar
[9]	袁泉.煤颗粒超细粉碎过程的分形研究[D].上海: 华东理工大学, 2013. Google Scholar
[10]	王婕.超细粉碎颗粒性质对超净煤分选的影响[D].北京: 中国矿业大学(北京), 2016. Google Scholar
[11]	李同清, 彭玉兴.研磨介质形状对铁矿石磨矿动力学研究[J].有色金属(选矿部分), 2018(1):84-89, 99. doi: 10.3969/j.issn.1671-9492.2018.01.016 CrossRef Google Scholar