Quantification of Major and Minor Components in Iron Ores with Sulfur, Arsenic and Vanadium by X-ray Fluorescence Spectrometry

ZHANG Li-juan; XU Tie-min; LI Xiao-li; AN Shu-qing; HAN Wei; ZHANG Nan; LIU Yi-bo

2011 Vol. 30, No. 6

Article Contents

Article navigation > Rock and Mineral Analysis > 2011 > 30(6): 772-776

Next Article Previous Article

ZHANG Li-juan, XU Tie-min, LI Xiao-li, AN Shu-qing, HAN Wei, ZHANG Nan, LIU Yi-bo. Quantification of Major and Minor Components in Iron Ores with Sulfur, Arsenic and Vanadium by X-ray Fluorescence Spectrometry[J]. Rock and Mineral Analysis, 2011, 30(6): 772-776.

Citation:

Quantification of Major and Minor Components in Iron Ores with Sulfur, Arsenic and Vanadium by X-ray Fluorescence Spectrometry

1.
Tianjin Institute of Geology and Mineral Resources, China Geological Survey, Tianjin 300170, China
2.
Tianjin Institute of Geology and Mineral Resources, China Geological Survey, Tianjin 300170, China
3.
Tianjin Institute of Geology and Mineral Resources, China Geological Survey, Tianjin 300170, China
4.
Tianjin Institute of Geology and Mineral Resources, China Geological Survey, Tianjin 300170, China
5.
Tianjin Institute of Geology and Mineral Resources, China Geological Survey, Tianjin 300170, China
6.
Tianjin Institute of Geology and Mineral Resources, China Geological Survey, Tianjin 300170, China
7.
Tianjin Institute of Geology and Mineral Resources, China Geological Survey, Tianjin 300170, China

Received Date: 21 December 2010

Publish Date: 28 December 2011

Abstract

Abstract

A method for the determination of 15 elements of TFe, SiO2, CaO, MgO, Al2O3, TiO2, P, S, Mn, V2O5, As, K2O, Na2O, Cu and Ni in high sulfur, arsenic iron ore by X-ray Fluorescence Spectrometry (XRF) was developed. Co in the form of cobalt glass powder was selected as the internal standard element for Fe determination. NH4NO3 served as the oxidant and Li2CO3 as the protective agent and were used for preventing the sulfur from volatilizing. Multi-kinds of standard references and artificial preparation iron ores were used for calibration. The almost overlapping spectral lines of Ti Κβ and V Κα were corrected by using the interfering curve method and the matrix effects were corrected by the theoretical alpha coefficient. The established method was possible to determine the TFe, the mass fraction of 5.29% S, 5.00% of V2O5 and 0.1% of As. The results were in accordance with certified values of standard reference materials. The RSDs met the requirements of lab qualify control, except the low content Na with RSD of <3.5%. The established method is a fast way to accurately obtain major and minor components in high S, As and V contents iron ores which is satisfied by the requirements of routine analysis.
- X-ray /
- fluorescence /
- spectrometry /
- iron /
- ores /
- cobalt