RESEARCH ON THE APPLICATION OF TURNAROUND FRACTURING TECHNOLOGY IN INJECTION-PRODUCTION CORRESPONDING WELLS

LI Min

2013 Vol. 19, No. 4

Article Contents

Article navigation > Journal of Geomechanics > 2013 > 19(4): 440-446

Next Article Previous Article

LI Min. RESEARCH ON THE APPLICATION OF TURNAROUND FRACTURING TECHNOLOGY IN INJECTION-PRODUCTION CORRESPONDING WELLS[J]. Journal of Geomechanics, 2013, 19(4): 440-446.

Citation:

LI Min. RESEARCH ON THE APPLICATION OF TURNAROUND FRACTURING TECHNOLOGY IN INJECTION-PRODUCTION CORRESPONDING WELLS[J]. Journal of Geomechanics, 2013, 19(4): 440-446.

RESEARCH ON THE APPLICATION OF TURNAROUND FRACTURING TECHNOLOGY IN INJECTION-PRODUCTION CORRESPONDING WELLS

LI Min

Fracturing & Acidizing Technology Research Institute of Fracturing Company, GWDC, Panjin 124107, Liaoning, China

Received Date: 31 March 2013

Publish Date: 25 December 2013

Abstract

Abstract

In order to solve the difficulty of the low permeability reservoir's low production of old wells and poor flood effectiveness in Shuguang mine area of Liaohe Oilfield, an injection-production corresponding wells of turnaround fracturing technology research is carried out. Through turnaround Mechanism, fracturing project of injection-production corresponding wells research, diverting agent selection and field conduct, it gets good effect on increasing production and injection. During this application research, turnaround fracturing technology is used for injection and production wells and widening the range of the turnaround fracturing, makes further proving turnaround fracturing has important significance to tap production and energization, and to improve the recovery of the low permeability reservoir.
- turnaround fracturing /
- injection-production corresponding /
- fracturing project /
- diverting agent

FullText(HTML)

References

[1]	白延峰, 王美强, 刘春杰, 等.转向压裂技术在老油田后期开发中的研究与应用[J].石油化工应用, 2011, 30(11):4~6. doi: 10.3969/j.issn.1673-5285.2011.11.003 CrossRef Google Scholar BAI Yan-feng, WANG Mei-qiang, LIU Chun-jie, et al. Study and application of divert fracturing technology in later-stage development of old oil field[J]. Petrochemical Industry Application, 2011, 30(11):4~6. doi: 10.3969/j.issn.1673-5285.2011.11.003 CrossRef Google Scholar
[2]	曹继虎, 杜向前, 李冰岩, 等.低渗透油田堵水转向压裂新技术研究与应用[J].石油化工应用, 2010, 29(1):49~53. Google Scholar CAO Ji-hu, DU Xiang-qian, LI Bing-yan, et al. Study and application of new technology of deflection fracturing by water shut-off in low-permeability oilfield[J]. Petrochemical Industry Application, 2010, 29(1):49~53. Google Scholar
[3]	孙峰, 李行船, 熊廷松, 等.低渗透油藏水力压裂井应力场转向定量评价[J].断块油气田, 2012, 19(4):489~492. Google Scholar SUN Feng, LI Xing-chuan, XIONG Ting-song, et al. Quantitative evaluation on stress redistribution for hydraulic fracturing well of low-permeability reservoir[J]. Fault-Block Oil and Gas Field, 2012, 19(4):489~492. Google Scholar
[4]	范振忠, 刘振华, 高立峰.低渗透裂缝性油藏封堵裂缝后转向压裂工艺[J].科学技术与工程, 2009, 9(1):113~115. Google Scholar FAN Zhen-zhong, LIU Zhen-hua, GAO Li-feng. Technology of plugging fracture and fracturing technology in fractured low permeability oil reservoir[J]. Science Technology and Engineering, 2009, 9(1):113~115. Google Scholar
[5]	王军峰, 马立军, 李传浩, 等.缝内转向压裂技术在靖安油田的应用[J].石油化工应用, 2007, 26(5):30~34. Google Scholar WANG Jun-feng, MA Li-jun, LI Chuan-hao, et al. The application of in-fissure divert fracturing technology in Jing'an oil field[J]. Petrochemical Industry Application, 2007, 26(5):30~34. Google Scholar
[6]	张应科, 钟水清, 吴月先, 等.加砂压裂转向配套技术描述模式及应用[J].钻采工艺, 2011, 34(5):56~57, 72. Google Scholar ZHANG Ying-ke, ZHONG Shui-qing, WU Yue-xian, et al. Description model of sand fracturing turning supporting technology and its application[J]. Drilling & Production Technology, 2011, 34(5):56~57, 72. Google Scholar
[7]	白红艳, 杨勇, 苏春娥.低渗透油田缝内转向压裂工艺适应性研究[J].石油化工应用, 2010, 29(2):56~60. Google Scholar BAI Hong-yan, YANG Yong, SU Chun-e. Adaptability research of fracture shift technology in low-permeability oil field[J]. Petrochemical Industry Application, 2010, 29(2):56~60. Google Scholar
[8]	吴勇, 陈凤, 承宁.利用人工暂堵剂转向提高重复压裂效果[J].钻采工艺, 2008, 31(4):59~61. Google Scholar WU Yong, CHEN Feng, CHENG Ning. Enhancing re-fracturing effect with artificial temporary plugging technology[J]. Drilling & Production Technology, 2008, 31(4):59~61. Google Scholar
[9]	王凤江, 丁云宏, 路勇.低渗透油田重复压裂技术研究[J].石油勘探与开发, 1999, 26(1):71~73. Google Scholar WANG Feng-jiang, DING Yun-hong, LU Yong. Study on refracturing technology in low permeability oil reservoir[J]. Petroleum Exploration and Development, 1999, 26(1):71~73. Google Scholar