Citation: | CHEN Yanbo, LI Guangsheng, ZHU Xingfu, XU Qing. Full Slime Cyanidation Leaching of the Primary Gold Ore from a Metallurgical Processing Plant in Gansu[J]. Multipurpose Utilization of Mineral Resources, 2024, 45(4): 139-144. doi: 10.3969/j.issn.1000-6532.2024.04.021 |
This is an article in the field of metallurgical engineering. A beneficiation and smelting plant processes two kinds of gold ores: primary ore and oxidized ore. The primary ore is treated by conventional flotation process. The gold recovery rate of flotation concentrate is about 85%, which is sold to smelting enterprises outside the province for cyanide leaching. The oxidized ore is treated by stirring cyanidation leaching activated carbon adsorption gold loaded carbon analytical electrodeposition gold slime smelting ingot casting process. The output gold ingot is sold outside, and the total recovery rate of gold dressing and metallurgy is about 90%. At present, with the deepening of mining depth, the ore properties change, the amount of oxidized ore gradually decreases, and the amount of primary ore gradually increases, resulting in excessive ore treatment in flotation system and insufficient ore treatment in leaching system, affecting the economic benefits of enterprises. Therefore, the enterprise considers adding the primary ore that cannot be treated by the flotation system to the existing oxidized ore all slime cyanidation leaching system to increase the gold ingot output and economic benefits of the enterprise. In order to enable the existing full slime cyanidation leaching system to leach the primary ore, based on the field investigation, the grinding fineness, reagent dosage and dissolved oxygen condition tests were carried out for the primary ore, and the alkali leaching pretreatment test and mixed oxidation ore leaching test were carried out in combination with the actual production. Based on these test and research results, specific rectification requirements and measures are put forward for the production site.
[1] | 陈福林, 杨晓军, 杨道广, 等. 甘肃某低品位钒钛磁铁矿工艺矿物学研究[J]. 矿产综合利用, 2020(6):64-68.CHEN F L, YANG X J, YANG D G, et al. Study on process mineralogy of a low grade vanadium titanium magnetite in Gansu[J]. Multipurpose Utilization of Mineral Resources, 2020(6):64-68. doi: 10.3969/j.issn.1000-6532.2020.06.011 CHEN F L, YANG X J, YANG D G, et al. Study on process mineralogy of a low grade vanadium titanium magnetite in Gansu[J]. Multipurpose Utilization of Mineral Resources, 2020(6):64-68. doi: 10.3969/j.issn.1000-6532.2020.06.011 |
[2] | 洪秋阳, 李美荣, 李波, 等. 国外某难选冶钒钛铁矿石工艺矿物学特征[J]. 矿产综合利用, 2020(6):48-54.HONG Q Y, LI M R, LI B, et al. Process mineralogical characteristics of a refractory vanadium titanium iron ore abroad[J]. Multipurpose Utilization of Mineral Resources, 2020(6):48-54. doi: 10.3969/j.issn.1000-6532.2020.06.009 HONG Q Y, LI M R, LI B, et al. Process mineralogical characteristics of a refractory vanadium titanium iron ore abroad[J]. Multipurpose Utilization of Mineral Resources, 2020(6):48-54. doi: 10.3969/j.issn.1000-6532.2020.06.009 |
[3] | 邓元良, 明平田, 王广伟, 等. 某金精矿焙烧氧化 - 氰化尾矿工艺矿物学研究[J]. 矿产综合利用, 2020(4):121-124.DENG Y L, MING P T, WANG G W, et al. Mineralogical study on roasting oxidation cyanidation tailings of a gold concentrate[J]. Multipurpose Utilization of Mineral Resources, 2020(4):121-124. doi: 10.3969/j.issn.1000-6532.2020.04.020 DENG Y L, MING P T, WANG G W, et al. Mineralogical study on roasting oxidation cyanidation tailings of a gold concentrate[J]. Multipurpose Utilization of Mineral Resources, 2020(4):121-124. doi: 10.3969/j.issn.1000-6532.2020.04.020 |
[4] | 邱 沙, 郭鹏志, 谢建平. 苏丹某金矿尼尔森重选-氰化浸出实验研究[J]. 矿产综合利用, 2017(2):19-23.QIU S, GUO P Z, XIE J P. Experimental study on Nelson gravity separation cyanidation leaching of a gold mine in Sudan[J]. Multipurpose Utilization of Mineral Resources, 2017(2):19-23. doi: 10.3969/j.issn.1000-6532.2017.02.005 QIU S, GUO P Z, XIE J P. Experimental study on Nelson gravity separation cyanidation leaching of a gold mine in Sudan[J]. Multipurpose Utilization of Mineral Resources, 2017(2):19-23. doi: 10.3969/j.issn.1000-6532.2017.02.005 |
[5] | 孟宇群 , 吴敏杰 , 宿少玲 , 等. 某含砷难浸金精矿常温常压强化碱浸预处理试验研究[J]. 黄金, 2002(6): 25-31.MENG Y Q, WU M J, SU S L, et al. Experimental study on enhanced alkali leaching pretreatment of an arsenic containing refractory gold concentrate at room temperature and pressure[J]. Gold, 2002(6): 25-31. MENG Y Q, WU M J, SU S L, et al. Experimental study on enhanced alkali leaching pretreatment of an arsenic containing refractory gold concentrate at room temperature and pressure[J]. Gold, 2002(6): 25-31. |
[6] | 祁磊, 席欣月, 蔡鑫, 等. 北衙硫化矿选厂尾矿中金银铁综合回收实验研究[J]. 矿产综合利用, 2021(4): 182-187.QI L, XI X Y, CAI X, et al. Experimental study on comprehensive recovery of gold, silver and iron from tailings of Beiya sulfide ore concentrator[J]. Multipurpose Utilization of Mineral Resources, 20021(4): 182-187. QI L, XI X Y, CAI X, et al. Experimental study on comprehensive recovery of gold, silver and iron from tailings of Beiya sulfide ore concentrator[J]. Multipurpose Utilization of Mineral Resources, 20021(4): 182-187. |
[7] | 王越, 王婧, 李潇雨, 等. 川西某金矿工艺矿物学研究及对选矿工艺的影响[J]. 矿产综合利用, 2021(4):206-210.WANG Y, WANG J, LI X Y, et al. Study on process mineralogy of a gold mine in Western Sichuan and its influence on beneficiation process[J]. Multipurpose Utilization of Mineral Resources, 2021(4):206-210. doi: 10.3969/j.issn.1000-6532.2021.04.034 WANG Y, WANG J, LI X Y, et al. Study on process mineralogy of a gold mine in Western Sichuan and its influence on beneficiation process[J]. Multipurpose Utilization of Mineral Resources, 2021(4):206-210. doi: 10.3969/j.issn.1000-6532.2021.04.034 |
[8] | 宁阳坤, 赵恒勤, 刘红召, 等. 某白烟尘碱浸实验研究[J]. 矿产综合利用, 2017(4):90-93.NING Y K, ZHAO H Q, LIU H Z, et al. Experimental study on alkali leaching of white smoke dust[J]. Multipurpose Utilization of Mineral Resources, 2017(4):90-93. doi: 10.3969/j.issn.1000-6532.2017.04.020 NING Y K, ZHAO H Q, LIU H Z, et al. Experimental study on alkali leaching of white smoke dust[J]. Multipurpose Utilization of Mineral Resources, 2017(4):90-93. doi: 10.3969/j.issn.1000-6532.2017.04.020 |
Grinding fineness test flow
Test flow of "alkali leaching pretreatment + cyanide leaching"
Test flow of separate grinding and mixed leaching