Investigation of New Floating Box Paste Backfill Roof contact Technology in Underground Mines

KANG Guohua; BAI Longjian; WANG Hongjiang; YAN Qingwen; LIU Meng; CHEN Chong; XIONG Youwei; LIU Jiaming

doi:10.13779/j.cnki.issn1001-0076.2024.02.006

2024 Vol. 44, No. 2

Article Contents

Article navigation > Conservation and Utilization of Mineral Resources > 2024 > 44(2): 46-51

Next Article Previous Article

KANG Guohua, BAI Longjian, WANG Hongjiang, YAN Qingwen, LIU Meng, CHEN Chong, XIONG Youwei, LIU Jiaming. Investigation of New Floating Box Paste Backfill Roof contact Technology in Underground Mines[J]. Conservation and Utilization of Mineral Resources, 2024, 44(2): 46-51. doi: 10.13779/j.cnki.issn1001-0076.2024.02.006

Citation:

KANG Guohua, BAI Longjian, WANG Hongjiang, YAN Qingwen, LIU Meng, CHEN Chong, XIONG Youwei, LIU Jiaming. Investigation of New Floating Box Paste Backfill Roof contact Technology in Underground Mines[J]. Conservation and Utilization of Mineral Resources, 2024, 44(2): 46-51. doi: 10.13779/j.cnki.issn1001-0076.2024.02.006

Investigation of New Floating Box Paste Backfill Roof contact Technology in Underground Mines

1.
CINF Engineering Co, Ltd., Changsha 410000, Hunan, China
2.
University of Science and Technology Beijing, Beijing 100083, China
3.
Yunnan Chihong Zn & Ge Co., Ltd., Qujing 654212, Yunnan, China

More Information

Corresponding author: BAI Longjian, bailongjian321@163.com

Received Date: 22 February 2024

Publish Date: 15 April 2024

Abstract

Abstract

The issue of the filling body exhibiting a certain degree of subsidence and self−flow slope angle following paste filling, which results in a suboptimal filling effect, must be addressed. In order to enhance the filling and roof−contacting efficacy of narrow and long downward drift stope and circumvent the instability associated with an excessively large exposed area of roof, a floating box−type point pillar roof−contacting technology was proposed. The bearing mechanism of floating box−type point columns was analyzed, and the calculation methods of floating box size, strength, and spacing were quantified. A series of field experiments were conducted to ascertain whether the floating box could float in a high viscosity slurry. The efficacy of the proposed design method and roof connection technology was validated through a case study of their application in a lead−zinc mine in Yunnan. The results demonstrated that the floating box can float in the high viscosity slurry and partially protrudes the filling body, thereby providing an effective support for the roof. The pressure exerted by the roof of the test stope on the floating box of the filling body was approximately 0.6 MPa. The utilization of floating box−type point−column roof−contacting technology enabled the formation of a joint support system comprising the filling body and floating box−type point−column. This configuration enhanced the stability of the roof, offering substantial safety benefits.
- drift fill stoping method /
- roof−contacted filling /
- buoyant box /
- industrial test

FullText(HTML)

References

[1]	吴爱祥, 杨莹, 程海勇, 等. 中国膏体技术发展现状与趋势[J]. 工程科学学报, 2018, 40(5): 517−525. Google Scholar WU A X, YANG Y, CHEN H Y, et al. Status and prospects of paste technology in China[J]. Chinese Journal of Engineering, 2018, 40(5): 517−525. Google Scholar
[2]	尹升华, 吴爱祥. 缓倾斜中厚矿体采矿方法现状及发展趋势[J]. 金属矿山, 2007(12): 10−13. doi: 10.3321/j.issn:1001-1250.2007.12.002 CrossRef Google Scholar YIN S H, WU A X. Status quo of mining methods for gently inclined medium−thick orebodies and their development trend[J]. Metal Mine, 2007(12): 10−13. doi: 10.3321/j.issn:1001-1250.2007.12.002 CrossRef Google Scholar
[3]	邵亚建. 采场内膏体料浆流动特性及充填接顶技术研究[D]. 北京: 北京科技大学, 2021. Google Scholar SHAO Y J. Study on flow characteristics of paste slurry and filling roof technology in stope[D]. Beijing: Beijing University of Science and Technology, 2021. Google Scholar
[4]	刘福春, 白龙剑, 严庆文, 等. 充填采场内膏体流动规律及接顶率预测模型[J]. 有色金属(矿山部分), 2023, 75(3): 124−130+136. Google Scholar LIU F C, BAI L J, YAN Q W, et al. Flow law of paste in filling stope and prediction model of roof rate[J]. Non−ferrous Metals, 2023, 75(3): 124−130+136. Google Scholar
[5]	吴爱祥, 王勇, 王洪江. 膏体充填技术现状及趋势[J]. 金属矿山, 2016(7): 1−9. Google Scholar WU A X, WANG Y, WANG H J. Present situation and trend of paste filling technology[J]. Metal Mine, 2016(7): 1−9. Google Scholar
[6]	张爱卿, 吴爱祥, 王贻明, 等. 分段胶结充填法非胶结充填体顶水高度的力学模型[J]. 中国有色金属学报, 2021, 31(6): 1686−1693. Google Scholar ZHANG A Q, WU A X, WANG Y M, et al. Mechanical model of top water height of non−cemented filling body in segmented cemented filling method[J]. Transactions of Nonferrous Metals Society of China, 2021, 31(6): 1686−1693. Google Scholar
[7]	朱磊, 宋天奇, 古文哲, 等. 矸石浆体输送阻力特性及采空区流动规律试验研究[J]. 煤炭学报, 2022, 47(S1): 39−48. Google Scholar ZHU L, SONG T Q, GU W Z, et al. Experimental study on transportation resistance characteristics of gangue slurry and flow law of goaf[J]. Journal of China Coal Society, 2022, 47(S1): 39−48. Google Scholar
[8]	LIM D K, CHOI M S. Shrinkage and crack characteristics of filling materials under restrain stress in prefabricated structure connection[J]. Construction and Building Materials, 2021, 309(11): 125188. Google Scholar
[9]	肖军. Mathews稳定图法在确定矿山采场暴露面积中的应用[J]. 新疆有色金属, 2013, 36(2): 19−20. Google Scholar XIAO J. The application of mathews stability diagram method in determining the exposed area of mine stope[J]. Xinjiang Non−ferrous Metals, 2013, 36(2): 19−20. Google Scholar
[10]	马志浩. 膨胀性全尾砂充填材料性能试验研究[J]. 矿业工程, 2022, 20(2): 22−26. Google Scholar MA Z H. Experimental study on the performance of expansive full tailings filling material[J]. Mineral Engineering, 2022, 20(2): 22−26. Google Scholar
[11]	白龙剑, 严国超, 杨涛. 氟石膏改性高水粉煤灰复合充填材料性能研究[J]. 矿业安全与环保, 2020, 47(6): 32−36. Google Scholar BAI L J, YAN G C, YANG T. Study on properties of fluorine gypsum modified high water fly ash composite filling material[J]. Mining Safety and Environmental Protection, 2020, 47(6): 32−36. Google Scholar
[12]	程文文. 等量分流技术在上向进路充填接顶中的应用[J]. 黄金, 2018, 39(3): 40−43. Google Scholar CHENG W W. The application of equivalent diversion technology in the upward drift filling roof[J]. Gold, 2018, 39(3): 40−43. Google Scholar
[13]	王梓安. 进路式充填采矿法充填接顶技术要点及有效应用[J]. 内蒙古煤炭经济, 2021(15): 122−123. doi: 10.3969/j.issn.1008-0155.2021.15.060 CrossRef Google Scholar WANG Z A. Key points and effective application of filling and roofing technology of drift filling mining method[J]. Coal Economy in Inner Mongolia, 2021(15): 122−123. doi: 10.3969/j.issn.1008-0155.2021.15.060 CrossRef Google Scholar
[14]	姜立春, 陈鹏, 吴爱祥. 基于不同充填接顶率的采空区顶板拱架自稳效应[J]. 中国有色金属学报, 2019, 29(1): 187−193. Google Scholar JIANG L C, CHEN P, WU A X. Self−stabilization effect of goaf roof arch based on different filling rate[J]. Chinese Journal of Nonferrous Metals, 2019, 29(1): 187−193. Google Scholar
[15]	赵国彦, 周礼, 李金跃, 等. 房柱法矿柱合理尺寸设计及矿块结构参数优选[J]. 中南大学学报(自然科学版), 2014, 45(11): 3943−3948. Google Scholar ZHAO G Y, ZHOU L, LI J Y, et al. Reasonable size design of room−and−pillar pillar and optimization of structural parameters of ore block[J]. Journal of Central South University (Natural Science Edition), 2014, 45(11): 3943−3948. Google Scholar
[16]	黄敏, KULATILAKE P H, 罗嗣海, 等. 传统矿柱安全系数计算公式优化研究[J]. 矿冶工程, 2020, 40(4): 32−37. Google Scholar HUANG M, KULATILAKE P H, LUO S H, et al. Study on optimization of calculation formula of traditional pillar safety factor[J]. Mining and Metallurgy Engineering, 2020, 40(4): 32−37. Google Scholar
[17]	汪波, 喻勇. 关于圆形隧道卡斯特纳公式的讨论[J]. 地下空间与工程学报, 2021, 17(5): 1408−1413. Google Scholar WANG B, YU Y. Discussion on Castner 's formula for circular tunnels[J]. Journal of Underground Space and Engineering, 2021, 17(5): 1408−1413. Google Scholar
[18]	韩森, 王卫军, 董恩远, 等. 基于支护干涉的巷道围岩蝶形塑性区控制方法研究[J]. 采矿与安全工程学报, 2023, 40(4): 743−753. Google Scholar HAN S, WANG W J, DONG E Y, et al. Study on control method of butterfly plastic zone in roadway surrounding rock based on support interference[J]. Journal of Mining and Safety Engineering, 2023, 40(4): 743−753. Google Scholar
[19]	ZHAO J S, JIANG Q, LU J F, et al. Rock fracturing observation based on microseismic monitoring and borehole imaging: In situ investigation in a large underground cavern under high geostress[J]. Tunnelling and Underground Space Technology, 2022, 126(8): 104549. Google Scholar
[20]	PRASSETYO H S, IRNAWAN A M, SIMANGUNSONG M G, et al. New coal pillar strength formulae considering the effect of interface friction[J]. International Journal of Rock Mechanics and Mining Sciences, 2019, 123(C). Google Scholar