Simulation analysis of the rotation hydraulic system of subsea drilling rig

LIU Guangzhi and LIANG Tao; ${author.authorNameEn}

doi:10.12143/j.ztgc.2023.02.004

2023 Vol. 50, No. 2

Article Contents

Article navigation > DRILLING ENGINEERING > 2023 > 50(2): 26-30

Next Article Previous Article

LIU Guangzhi and LIANG Tao, . 2023. Simulation analysis of the rotation hydraulic system of subsea drilling rig. DRILLING ENGINEERING, 50(2): 26-30. doi: 10.12143/j.ztgc.2023.02.004

Citation:

LIU Guangzhi and LIANG Tao, . 2023. Simulation analysis of the rotation hydraulic system of subsea drilling rig. DRILLING ENGINEERING, 50(2): 26-30. doi: 10.12143/j.ztgc.2023.02.004

Simulation analysis of the rotation hydraulic system of subsea drilling rig

LIU Guangzhi and LIANG Tao¹,
^1, ,

Beijing Institute of Exploration Engineering, Beijing 100083， China

More Information

Corresponding author: , 289242603@qq.com

Received Date: 15 June 2022

Revised Date: 13 September 2022

Abstract

Abstract

Seabed drilling rig is indispensable technical equipment for seabed resource exploration， marine geological survey and marine scientific investigation， and the rotation system is one of the core components of seabed drilling rig for providing rotational speed and torque for the drill bit. In the hydraulic system with quantitative pump oil supply， a differential relief valve is placed in the rotation system to reduce the influence of load fluctuation on the output speed of the system. The rotation hydraulic system of subsea drilling rig is modeled and simulated by AMESim at step load. The simulation results show that the constant differential relief valve can always make the pump outlet pressure match the load， effectively improve the stability of output speed， and at the same time realize system energy saving.
- subsea rig /
- rotation system /
- hydraulic system /
- constant differential relief valve /
- AMESim

FullText(HTML)

References

[1]	鄢泰宁，补家武，李邵军.浅析国外海底取样技术的现状及发展趋势——海底取样技术介绍之一［J］.地质科技情报，2000，19（2）：67-70. Google Scholar YAN Taining， BU Jiawu， LI Shaojun. Brief study on the international present condition and developing tendency of the technology of sea floor sample drilling［J］. Geological Science and Technology Information， 2000，19（2）：67-70. Google Scholar
[2]	[2] 刘德顺，金永平，万步炎，等.深海矿产资源岩心探测取样技术与装备发展历程与趋势［J］.中国机械工程，2014，25（23）：3255-3265. Google Scholar LIU Deshun， JIN Yongping， WAN Buyan， et al. Review and development trends of deep-sea mineral resource core sampling technology and equipment［J］. China Mechanical Engineering， 2014，25（23）：3255-3265. Google Scholar
[3]	[3] 闫凯，孙军，杨慧良，等.海洋区域地质调查技术方法进展［J］.海洋开发与管理，2018，35（9）：107-114. Google Scholar YAN Kai， SUN Jun， YANG Huiliang， et al. Progress in technologies and methods of regional marine geology survey［J］. Ocean Development and Management， 2018，35（9）：107-114. Google Scholar
[4]	[4] 倪国江.海洋资源开发技术发展趋势及我国的发展重点［J］.海洋技术，2009，28（1）：133-136. Google Scholar NI Guangjiang. Development in marine resources development technology and China’s strategic focus［J］. Journal of Ocean Technology， 2009，28（1）：133-136. Google Scholar
[5]	[5] 郑苗壮，刘岩，李明杰，等.我国海洋资源开发利用现状及趋势［J］.海洋开发与管理.2013，30（12）：13-16. Google Scholar ZHENG Miaozhuang， LIU Yan， LI Mingjie， et al. Current state and trend of development and utilization of marine resources in China［J］. Ocean Development and Management， 2013，30（12）：13-16. Google Scholar
[6]	[6] 邬长斌，刘少军，戴瑜.海底多金属硫化物开发动态与前景分析［J］.海洋通报.2008，27（6）：101-109. Google Scholar WU Changbin， LIU Shaojun， DAI Yu. Exploitation situation and prospect analysis of seafloor polymetallic sulfides［J］. Marine Bulletin， 2008，27（6）：101-109. Google Scholar
[7]	[7] 杨建民，刘磊，吕海宁，等.我国深海矿产资源开发装备研发现状与展望［J］.中国工程科学，2020，22（6）：1-9. Google Scholar YANG Jianmin， LIU Lei， Haining LÜ， et al. Deep-sea mining equipment in China： Current status and prospect［J］. Chinese Engineering Science， 2020，22（6）：1-9. Google Scholar
[8]	[8] 彭奋飞，王佳亮，万步炎，等.适用于海底钻机的保压绳索取心钻具设计［J］.钻探工程，2021，48（4）：97-103. Google Scholar PENG Fenfei， WANG Jialiang， WAN Buyan， et al. Design of the pressure-coring tool for underwater drilling rig［J］. Drilling Engineering， 2021，48（4）：97-103. Google Scholar
[9]	[9] T.Freudenthal， G.Wefer. Drilling cores on the sea floor with the the remote-controlled sea floor drilling rig MeBo［J］. Geoscientific Instrumentation Methods and Data Systems， 2013（2）：329-337. Google Scholar
[10]	[10] 张汉泉，陈奇，万步炎，等.海底钻机的国内外研究现状与发展趋势［J］.湖南科技大学学报（自然科学版），2016，31（1）：1-7. Google Scholar ZHANG Hanquan， CHEN Qi， WAN Buyan， et al. Current research and development trends of seabed drill rig［J］. Journal of Hunan University of Science and Technology （Natural Science Edition）， 2016，31（1）：1-7. Google Scholar
[11]	[11] 王纪森，林志纲.基于AMESim负载敏感系统仿真与分析［J］.机床与液压，2012，40（8）：78-79. Google Scholar WANG Jisen， LIN Zhigang. The simulation and analysis of load sensitive system based on AMESim［J］. Machine Tools and Hydraulics， 2012，40（8）：78-79. Google Scholar
[12]	[12] 付永领.AMESim系统建模和仿真实例教程［M］.北京：北京航空航天大学出版社，2011.FU Yongling. AMESim System Modeling and Simulation Example Tutorial［M］. BeiJing： Beijing University of Aeronautics and Astronautics Press， 2011. Google Scholar
[13]	[13] 谭宗柒，戴浩林，汪云峰.基于AMESim的深度模拟器液压系统设计与仿真［J］.机床与液压，2009，37（2）：150-152，200. Google Scholar TAN Zongqi， DAI Haolin， WANG Yunfeng. Design and simulation of hydraulic depth simulator based on AMESim［J］. Machine Tools and Hydraulics， 2009，37（2）：150-152，200. Google Scholar
[14]	[14] 刘旭光，白祖卫，吕佩东，等.DGZ-150B型旋喷钻机提升系统稳定性分析及改进［J］.探矿工程（岩土钻掘工程），2019，46（9）：88-93. Google Scholar LIU Xuguang， BAI Zuwei， Peidong LÜ， et al. DGZ-150B stability analysis and improvement of lifting system of rotary jet drilling rig［J］. Exploration Engineering （Rock & Soil Drilling and Tunneling）， 2019，46（9）：88-93. Google Scholar
[15]	[15] 谭玉山，王金友，林宝新，等.液压动力头岩心钻机的负载敏感液压回路［J］.探矿工程（岩土钻掘工程），2010，37（3）：32-34. Google Scholar TAN Yushan， WANG Jinyou ，LIN Baoxin， et al. Load sensing hydraulic circuit on hydraulic driving head core drill［J］.Exploration Engineering （Rock & Soil Drilling and Tunneling）， 2010，37（3）：32-34. Google Scholar
[16]	[16] 刘晓林，刘家誉，王嘉瑞，等.海底基盘控制系统方案设计［J］.探矿工程（岩土钻掘工程），2019，46（7）：77-82，93. Google Scholar LIU Xiaolin， LIU Jiayu， WANG Jiarui， et al. Design of control system for seafloor template［J］. Exploration Engineering （Rock & Soil Drilling and Tunneling）， 2019，46（7）：77-82，93. Google Scholar