Research and application of large-diameter DTH hammer casing drilling technology for straight drainage wells

ZHANG Xiao’ang; HAO Dengfeng; LIU Guowei and QI Zhihu; ${author.authorNameEn}

doi:10.12143/j.ztgc.2022.06.018

2022 Vol. 49, No. 6

Article Contents

Article navigation > DRILLING ENGINEERING > 2022 > 49(6): 130-137

Next Article Previous Article

ZHANG Xiao’ang, HAO Dengfeng, LIU Guowei and QI Zhihu, . 2022. Research and application of large-diameter DTH hammer casing drilling technology for straight drainage wells. DRILLING ENGINEERING, 49(6): 130-137. doi: 10.12143/j.ztgc.2022.06.018

Citation:

ZHANG Xiao’ang, HAO Dengfeng, LIU Guowei and QI Zhihu, . 2022. Research and application of large-diameter DTH hammer casing drilling technology for straight drainage wells. DRILLING ENGINEERING, 49(6): 130-137. doi: 10.12143/j.ztgc.2022.06.018

Research and application of large-diameter DTH hammer casing drilling technology for straight drainage wells

1.Coal Geology Bureau of Henan Province, Zhengzhou Henan 450016, China;
2.Henan Yuzhong Geological Exploration Engineering Co., Zhengzhou Henan 450016, China;
3.Henan Provincial Energy Drilling Engineering Technology Research Center, Zhengzhou Henan 450016, China;
4.Henan Natural Resources Science and Technology Innovation Center (Unconventional Natural Gas Development;and Research), Zhengzhou Henan 450016, China

More Information

Corresponding author: , qzh6707@163.com

Received Date: 07 December 2021

Revised Date: 20 March 2022

Abstract

Abstract

Water gushing after the closure of Wangtaipu Mine has threaten the safety production of adjacent mines. Water drainage with large-diameter straight drainage wells is an important approach to reduce the above impact. According to the coal seam geology and water inflow， the diameter of the straight drainage well is designed as ?650 mm. Since the target stratum is a roadway and passes through the goaf of No.3 coal seam， the conventional drilling method will somehow compromise the safety of the target stratum， and it also has slow drilling speed with high cost. To this end， this paper proposes a new casing drilling technology with the large-diameter DTH hammer， where the rock is broken by the DTH hammer， and the casing is used to reduce the up-hole annulus area， hence the the air consumption， eliminating effectively the technical problems of large air volume demand and high cost in large-diameter air drilling. This paper expounds the working principle， characteristics and equipment composition of the technology， and analyzes its application results in the construction of three large diameter straight drainage wells in Wangtaipu Mine. Field application shows that this technology has low air consumption， good cleaning of cuttings and excellent sealing performance. The average well construction period of the 3 large diameter straight drainage wells is 20 days with the average drilling efficiency of 10m/h. It greatly improves the large diameter drilling efficiency， reduces the drilling cost and provides important reference for large diameter drilling.
- larger diameter borehole /
- air drilling /
- DTH hammer casing drilling /
- wellhead seal /
- mine well safety

FullText(HTML)

References

[1]	武强，李松营.闭坑矿山的正负生态环境效应与对策［J］.煤炭学报，2018，43（1）：21-32. Google Scholar WU Qiang， LI Songying. Positive and negative environmental effects of closed mines and its countermeasures［J］. Journal of China Coal Society， 2018，43（1）：21-32. Google Scholar
[2]	[2] 杨高峰，卫金善，杨新亮，等.晋城矿区凤凰山矿周边闭坑矿井水害分析及治理［J］.煤田地质与勘探，2019，47（S1）：14-19. Google Scholar YANG Gaofeng， WEI Jinshan， YANG Xinliang， et al. Analysis and treatment of water hazard in closed mines around Fenghuangshan mine in Jincheng［J］. Coal Geology & Exploration， 2019，47（S1）：14-19. Google Scholar
[3]	[3] 牛垚宾.直排井在煤矿主排水系统中的应用［J］.江西建材，2014（22）：225.NIU Yaobin. Application of vertical well drainage in main drainage system of coal mine［J］. Jiangxi Building Materials， 2014（22）：225. Google Scholar
[4]	[4] 王立峰，张晓昂，徐影.单体大直径空气潜孔锤钻井工艺研究及应用［J］.中国煤炭地质，2021，33（8）：65-67. Google Scholar WANG Lifeng， ZHANG Xiaoang， XU Ying. Study on and application of unicum large diameter pneumatic DTH hammer drilling technology［J］. Coal Geology of China， 2021，33（8）：65-67. Google Scholar
[5]	[5] 张勇，何宜霏，李民，等.潜孔锤跟管钻进技术在煤层气井钻遇复杂地层中的应用［J］.煤炭科技，2019，40（6）：54-56. Google Scholar ZHANG Yong， HE Yifei， LI Min， et al. Application of DTH hammer and tube drilling technology in complicated strata in coalbed methane well drilling［J］. Journal of China Coal Society， 2019，40（6）：54-56. Google Scholar
[6]	[6] 王艳丽，许刘万，伍晓龙，等.大口径矿山抢险救援快速钻进技术［J］.探矿工程（岩土钻掘工程），2015，42（8）：1-5. Google Scholar WANG Yanli， XU Liuwan， WU Xiaolong， et al. Fast drilling technology of large diameter well for emergency rescue in mine［J］. Exploration Engineering （Rock & Soil Drilling and Tunneling）， 2015，42（8）：1-5. Google Scholar
[7]	[7] 伍新民，吴俊贤，易振兴，等.气动潜孔锤钻进技术在井下大口径孔施工的应用研究［J］.西部探矿工程，2017，29（1）：28-31. Google Scholar WU Xinmin， WU Junxian， YI Zhenxing， et al. Application research on pneumatic hammer drilling technology in large diameter drilling hole construction［J］. West-China Exploration Engineering， 2017，29（1）：28-31. Google Scholar
[8]	[8] 刘建林，殷琨.大直径反循环钻头底面形状设计大直径反循环钻头底面形状设计［J］.煤田地质与勘探，2012，40（3）：82-85. Google Scholar LIU Jianlin， YIN Kun. Design of undersurface figure for large-diameter reverse circulation drill bit［J］. Coal Geology & Exploration， 2012，40（3）：82-85. Google Scholar
[9]	[9] 王达，何远信，等.地质钻探手册［M］.长沙：中南大学出版社，2014.WANG Da， HE Yuanxin， et al. Geological Drilling Handbook［M］. Changsha： Central South University Press， 2014. Google Scholar
[10]	[10] 殷其雷.潜孔锤反循环钻探工艺试验研究［D］.长春：吉林大学，2014.YIN Qilei. Research on the drilling technology of DTH hammer reverse circulation［D］. Changchun： Jilin University， 2014. Google Scholar
[11]	[11] 赵华宣，李强，陈涛，等.贵州碳酸岩地层地热深井空气潜孔锤钻进技术应用研究［J］. 探矿工程（岩土钻掘工程），2017，44（2）：37-42. Google Scholar ZHAO Huaxuan， LI Qiang， CHEN Tao， et al. Research and application of air DTH hammer drilling technology for deep geothermal well in Guizhou carbonate formation［J］. Exploration Engineering （Rock & Soil Drilling and Tunneling）， 2017，44（2）：37-42. Google Scholar
[12]	[12] 石荆京，苏园园，郑秀华.空气潜孔锤钻进技术在沉积岩地热深井中的应用［J］.钻探工程，2021，48（S1）：160-163. Google Scholar SHI Jingjing， SU Yuanyuan， ZHENG Xinhua. Application of air DTH hammer drilling technology in sedimentary rock deep geothermal wells［J］. Drilling Engineering， 2021，48（S1）：160-163. Google Scholar
[13]	[13] 石荆京，张海林，苏园园，等.空气潜孔锤钻进技术在舜皇山基岩地热深井的应用［J］.钻探工程，2021，48（10）：36-42. Google Scholar SHI Jingjing， ZHANG Hailin， SU Yuanyuan， et al. Application of air DTH hammer drilling technology in deep bedrock geothermal well in the Shunhuang Mountain［J］. Drilling Engineering， 2021，48（10）：36-42. Google Scholar
[14]	[14] 陈怡.空气潜孔锤钻进技术在援豫抗旱找水成井施工中的应用［J］.贵州地质，2012，29（2）：128-131. Google Scholar CHEN Yi. Application of DTH hammer drilling technology in water searching well constrcution［J］. Guizhou Geology， 2012，29（2）：128-131. Google Scholar
[15]	[15] 许刘万，刘智荣，赵明杰，等.多工艺空气钻进技术及其新进展［J］.探矿工程（岩土钻掘工程），2009，36（10）：8-14. Google Scholar XU Liuwan， LIU Zhirong， ZHAO Mingjie， et al. Alternative process air-drilling technology and its new development［J］. Exploration Engineering （Rock & Soil Drilling and Tunneling）， 2009，36（10）：8-14. Google Scholar
[16]	[16] 曹雷强，吴红兵.气动潜孔锤工艺可行性研究［J］.世界有色金属，2020（3）：261-262. Google Scholar CAO Leiqiang， WU Hongbing. Feasibility study on pneumatic DTH hammer technology［J］. World Nonferrous Metals， 2020（3）：261-262. Google Scholar
[17]	[17] 齐治虎，张童童，秦红涛.沁水盆地过采空区煤层气水平井施工技术研究［J］.钻探工程，2021，48（S1）：281-285. Google Scholar QI Zhihu， ZHANG Tongtong， QIN Hongtao. Research on drilling technology for coalbed methane horizontal wells through mining goafs in Qinshui Basin［J］. Drilling Engineering， 2021，48（S1）：281-285. Google Scholar