LI Kui. 2022. Plugging of breathing formation in deep shale gas wells in Luzhou: Taking Well Y101H3-4 for example. DRILLING ENGINEERING, 49(5): 106-110. doi: 10.12143/j.ztgc.2022.05.015
Citation: |
LI Kui. 2022. Plugging of breathing formation in deep shale gas wells in Luzhou: Taking Well Y101H3-4 for example. DRILLING ENGINEERING, 49(5): 106-110. doi: 10.12143/j.ztgc.2022.05.015
|
Plugging of breathing formation in deep shale gas wells in Luzhou: Taking Well Y101H3-4 for example
-
Abstract
The depth of deep shale formation in Luzhou is about 4000m. It is typical high-pressure formation, where Shiniulan Formation drilled is a sandstone-rich mudstone. In this area, high-pressure formation gas was often encountered in drilling operations, increasing risks of gas-kick and lost circulation; meanwhile, pulsation wellbore leakage was observed while using high-density drilling mud. All these issues posed great challenges to drilling operations in this region. To address this issue, taking Well Y101H3-4 as an example, some wellbore plugging treatments were tested. Results showed that:①Typical wellbore plugging materials can not effectively plug wellbore leakage due to incompatible material-fracture sizes.②Based on drilling history of neighboring wells, reducing drilling mud density helped with wellbore plugging operations.③Oil-based cement plugging was the most effective method to deal with the formation with pulsated lost circulation at the prerequisite that proper mud density should be determined to prevent contamination due to contact between drilling mud and cement slurry. In conclusion, reducing mud density and use of oil-based cement plugging are the best method for pulsated lost-of-circulation in the Luzhou Block.
-
-
References
[1]
|
万昕,左星,王佩珊.浅谈漏喷同存复杂地层的技术对策[J].钻采工艺,2018,41(4):34-36,47.
Google Scholar
WANG Xin, ZUO Xing, WANG Peishan. Technology for loss-kick scenarios[J]. Drilling & Production Technology, 2018,41(4):34-36,47.
Google Scholar
|
[2] |
[2] 晏凌,吴会胜.精细控压钻井技术在漏喷同存复杂井中的应用[J].天然气工业,2015,35(2):59-63.
Google Scholar
YAN Ling, WU Huisheng. Application of precise MPD in kick & loss wells[J]. Natural Gas Industry, 2015,35(2):59-63.
Google Scholar
|
[3] |
[3] 李涛,郭清,程兴洁.四川盆地泸203井区钻井“漏喷同存”浅析[J].石化技术,2021,5(4):157-158.
Google Scholar
LI Tao, GUO Qing, CHENG Xingjie. Analysis of “lost circulation and overflow coexisting” in well of Sichuan Basin L203 Block[J]. Petrochemical Industy Technology, 2021,5(4):157-158.
Google Scholar
|
[4] |
[4] 孙梅方,冯京海,朱宽亮.川庆精细控压钻井技术在NP23-P2009井的应用研究[J].钻采工艺,2012,35(3):1-4.
Google Scholar
SUN Meifang, FENG Jinghai, ZHU Kuangliang. Application of Chuanqing fine pressure control drilling technology in NP23-P2009 well[J]. Drilling & Production Technology, 2012,35(3):1-4.
Google Scholar
|
[5] |
[5] 姜智博,周英操,王倩.实现窄密度窗口安全钻井的控压钻井系统工程[J].天然气工业,2011,31(8):76-79.
Google Scholar
JIANG Zhibo, ZHOU Yingcao, WANG Qian. Managed pressure drilling system used in narrow density window drilling scenarios[J]. Natural Gas Industry, 2011,31(8):76-79.
Google Scholar
|
[6] |
[6] 郑有成,李向碧,邓传光.川东北地区恶性井漏处理技术探索[J].天然气工业,2003,23(6):84-85.
Google Scholar
ZHENG Youcheng, LI Xiangbi, DENG Chuanguang. Techniques of treating seriously lost circulations in northeast Sichuan[J]. Natural Gas Industry, 2003,23(6):84-85.
Google Scholar
|
[7] |
[7] 曾明昌,曾时田,毛建华.气井喷漏同存的处理技术研究[J].天然气工业,2005,25(6):42-44.
Google Scholar
ZENG Mingchang, ZENG Shitian, MAO Jianhua. Treatment technology of blow out-lost circulation coexistence in gas hole drilling[J]. Natural Gas Industry, 2005,25(6):42-44.
Google Scholar
|
[8] |
[8] 黄花香,熊艳.川东北地区恶性井漏层段地震预测技术探索[J].石油物探,2005,44(2):142-144.
Google Scholar
HUANG Huaxiang, XIONG Yan. Preliminary study on seismic prediction for severe leakage horizons in northeast Sichuan[J]. Geophysical Prospeciting for Petroleum, 2005,44(2):142-144.
Google Scholar
|
[9] |
[9] 张卫平.漏喷同存井段全井高密度随钻堵漏钻井液技术[J].钻井液与完井液,2008,25(4):58-60.
Google Scholar
ZHANG Weiping. High density LCM drilling fluid technology solved the problem of the coexistence of blowout and mud losses[J]. Drilling Fluids &Completion Fluids, 2008,25(4):58-60.
Google Scholar
|
[10] |
[10] 陈明,窦玉玲.川东北元坝区块井身结构优化设计[J].天然气技术,2010,4(3):44-47.
Google Scholar
CHEN Ming, DOU Yuling. Optimization design of casing program in Yuanba Block, Northeastern Sichuan Basin[J]. Natural Gas Technology, 2010,4(3):44-47.
Google Scholar
|
[11] |
[11] 王建龙,于志强.四川盆地泸州区块深层页岩气水平井关键技术[J].石油钻探技术,2021,49(6):17-22.
Google Scholar
WANG Jianlong, YU Zhiqiang. Key technologies for deep shale gas horizontal well drilling in Luzhou Block in Sichuan Basin[J]. Petroleum Drilling Techniques, 2021,49(6):17-22.
Google Scholar
|
[12] |
[12] 张立新,刘端.高密度油基钻井液在阳101H3-6井长水平段应用[J].钻探工程,2021,7(7):79-83.
Google Scholar
ZHANG Lixin, LIU Rui. Application of high-density oil based drilling fluid in the long horizontal section of Well Yang101H3-6[J]. Drilling Engineering, 2021,7(7):79-83.
Google Scholar
|
[13] |
[13] 樊继强,刘学娜.皖页1HF井油基钻井液技术研究及应用[J].探矿工程(岩土钻掘工程),2020,47(10):23-28.
Google Scholar
FAN Jiqiang, LIU Xuena.Research and application of oil-based drilling fluid technology for Well Wanye-1HF[J]. Exploration Engineering (Rock & Soil Drilling and Tunneling), 2020,47(10):23-28.
Google Scholar
|
[14] |
[14] 刘政,李茂森,何涛.抗高温强封堵油基钻井液在足201-H1井的应用[J].钻采工艺,2019,42(6):122-125.
Google Scholar
LIU Zheng, LI Maosen, HE Tao. Application of high temperature high-plugging OBM in Well ZU201-H1[J]. Drilling & Production Technology, 2019,42(6):122-125.
Google Scholar
|
[15] |
[15] 周峰,张华,李明宗,等.强封堵型无土相油基钻井液在四川页岩气井水平段的应用[J].钻采工艺,2016,3(22):106-108.
Google Scholar
ZHOU Feng, ZHANG Hua, LI Mingzong, et al. Application of strong sealing glay-free oil-based drilling fluid in horizontal section of Sichuan shale gas reservoir[J]. Drilling & Production Technology, 2016,3(22):106-108.
Google Scholar
|
[16] |
[16] 孙凯,刘化伟,明鑫,等.自201井区页岩气井水平段安全高效钻井技术[J].钻探工程,2022,49(2):104-109.
Google Scholar
SUN Kai, LIU Huawei, MING Xin, et al. Safe and high-efficiency drilling technology for horizontal sections of shale gas wells in Well Block Zi-201[J]. Drilling Engineering, 2022,49(2):104-109.
Google Scholar
|
-
-
Access History