Intensive cut coiled tubing fracturing technology and its application

HOU Jinglong; WANG Chuanqing; LI Yudong and LIU Yan; ${author.authorNameEn}

doi:10.12143/j.ztgc.2021.11.007

2021 Vol. 48, No. 11

Article Contents

Article navigation > DRILLING ENGINEERING > 2021 > 48(11): 43-49

Next Article Previous Article

HOU Jinglong, WANG Chuanqing, LI Yudong and LIU Yan, . 2021. Intensive cut coiled tubing fracturing technology and its application. DRILLING ENGINEERING, 48(11): 43-49. doi: 10.12143/j.ztgc.2021.11.007

Citation:

HOU Jinglong, WANG Chuanqing, LI Yudong and LIU Yan, . 2021. Intensive cut coiled tubing fracturing technology and its application. DRILLING ENGINEERING, 48(11): 43-49. doi: 10.12143/j.ztgc.2021.11.007

Intensive cut coiled tubing fracturing technology and its application

1. Downhole Service Sub‑Company of Daqing Oilfield Limited Company, Daqing Heilongjiang 163453， China;
2. No. 7 Production Company of Daqing Oilfield Limited Company, Daqing Heilongjiang 163453， China

Received Date: 23 February 2021

Revised Date: 29 June 2021

Abstract

Abstract

The Fuyu and Gaotaizi tight oil reservoirs have the characteristic of low porosity with permeability less than 0.01mD， and poor reservoir property. As a result， conventional well completion cannot achieve the effective development， which can only be made possible by volume stimulation. In the past， this kind of reservoir was treated by SRV fracturing with the long horizontal section（1600m） plus the bridge plug， but it was not well targeted and the fracturing operation was inefficiency. In view of the properties of both reservoirs and the problems in fracturing technology， research was conducted on the new intensive cut coiled tubing fracturing technique with the maximization of the crack controlled reserve as the target and the coiled tube carrying the Y211 bottom hole assembly， and separate fracturing of each cluster. Application in four wells in Block 173-86 resulted in effective SRV， and improvement of the fracturing effect with significantly increased output. The well of Q196-P2 has been fractured up to 118 sections， setting a record in the cut section per single well in China. All the wells are producing by natural flows after fracturing measures， indicating obvious effect.
- reservoir fracturing /
- intensive cutting /
- fracture control /
- coiled tubing /
- ejection gun /
- tight oil

FullText(HTML)

References

[1]	石孝志，张俊成，焦亚军，等.连续油管多簇喷砂射孔填砂暂堵分段体积压裂技术［J］.钻采工艺，2020，43（6）：35-37. Google Scholar SHI Xiaozhi ，ZHANG Juncheng， JIAO Yajun， et al. Mult stage fractring technology with coiled tubing mult-cluster hydraulic jet perforating and sand bridging in hydraulic fracturing for shale gas reservoirs［J］. Drilling & Production Technology， 2020，43（6）：35-37. Google Scholar
[2]	[2] 吴奇，胥云，张守良，等.非常规油气藏体积改造技术核心理论与优化设计关键［J］.石油学报，2014，35（4）：706-714. Google Scholar WU Qi， XU Yun， ZHANG Shouliang， et al. The core theories and key optimization designs of volume stimulation technology for unconventional reservoirs［J］. Petroleum Journal， 2014，35（4）：706-714. Google Scholar
[3]	[3] 李宪文，樊凤玲，杨华，等.鄂尔多斯盆地低压致密油藏不同开发方式下的水平井体积压裂实践［J］.钻采工艺，2016，39（3）：34-36. Google Scholar LI Xianwen，PAN Fengling，YANG Hua，et al. Voliame fractiaring practice of horizontal wells in low pressure compact reservoirs of Ordos Basin under different development modes［J］. Drilling & Production Technology， 2016，39（3）：34-36. Google Scholar
[4]	[4] 王丽峰，胡忠民，朱书仪，等.连续油管底封拖动水力喷射环空加砂分段压裂技术在九区石炭系水平井的应用［J］.新疆石油天然气，2017，13（2）：65-69. Google Scholar WANG Lifeng， HU Zhongmin， ZHU Shuyi， et al. Application of annular multistage-hydrajet-fracturing technology with coiled tubing carrying a single packer of the sidetracking horizontal wells in the 9-area， Karamy Oilfield［J］. Xinjiang Oil & Gas， 2017，13（2）：65-69. Google Scholar
[5]	[5] 李智，胥云，王振铎，等.水力喷砂压裂工具喷嘴磨损分析［J］.石油矿场机械，2010，39（11）：25-28. Google Scholar LI Zhi， XU Yun， WANG Zhenduo， et al. Analysis on nozzle wear of hydraulic sandblast fracturing tools［J］. Oil Field Equipment， 2010，39（11）：25-28. Google Scholar
[6]	[6] 李智.井下水力喷射压裂工具结构优化设计研究［D］.西安：西安石油大学，2011.LI Zhi. Study on optimized design of downhole hydrajet fracturing tool structures［D］. Xi’an： Xi’an Shiyou University， 2011. Google Scholar
[7]	[7] 杜丙国，马清明.小直径管内水力切割器的研制与应用［J］.石油钻采工艺，2012，34（6）：112-113，116. Google Scholar DU Bingguo， MA Qingming. Development and application of a small-diameter inside tube hydraulic cutter［J］. Oil Drilling & Production Technology， 2012，34（6）：112-113，116. Google Scholar
[8]	[8] 李根生，沈忠厚.高压水射流理论及其在石油工程中应用研究进展［J］.石油勘探与开发，2005， 32（1）：96-99. Google Scholar LI Gensheng， SHEN Zhonghou. Advances in researches and applications of water jet theory in petroleum engineering［J］. Petroleum Exploration and Development， 2005， 32（1）：96-99. Google Scholar
[9]	[9] 张照阳，韩田兴，周培尧，等.连续油管水力喷射环空压裂工艺研究及应用［J］.内蒙古石油化工，2014，40（22）：9-11. Google Scholar ZHANG Zhaoyang， HAN Tianxing， ZHOU Peiyao， et al. Coiled tubing hydraulic fracturing ring jet research and application of space［J］. Inner Mongolia Petrochemical Industry， 2014，40（22）：9-11. Google Scholar
[10]	[10] 王金友，许国文，李琳，等.连续油管拖动底封水力喷射环空加砂分段压裂技术［J］.石油矿场机械，2016，45（5）：69-72. Google Scholar WANG Jinyou， XU Guowen， LI Lin， et al. Technology of coiled tubing abrasive perforating and annulus fracturing［J］. Oil Field Equipment， 2016，45（5）：69-72. Google Scholar
[11]	[11] 白艳伟.低渗透储层水力喷射压裂产能研究［D］.西安：西安石油大学，2013.BAI Yanwei. Productivity study of hydraulic fracturing in low permeability reservoir［D］. Xi’an： Xi’an Shiyou University， 2013. Google Scholar
[12]	[12] 王佳，穆佳成，高京卫.水力喷砂射孔参数优化设计研究［J］.内蒙古石油化工，2013，39（19）：7-9. Google Scholar WANG Jia， MU Jiacheng， GAO Jingwei. Design and research on parameter optimization of hydraulic perforating with sand［J］. Inner Mongolia Petrochemical Industry， 2013，39（19）：7-9. Google Scholar
[13]	[13] 郭建春，杨立君，赵金洲，等.压裂过程中孔眼摩阻计算的改进模型及应用［J］.天然气工业，2005，25（5）：69-71. Google Scholar GUO Jianchun， YANG Lijun， ZHAO Jinzhou，et al. Modified model and application of calculating perforation pressure loss during hydraulic fracturing［J］. Natural Gas Industry， 2005，25（5）：69-71. Google Scholar
[14]	[14] 韩继勇，逄仁德，王书宝，等.水力喷射环空压裂技术在长庆油田的应用［J］.钻采工艺，2015，38（1）：48-50. Google Scholar HAN Jiyong，PENG Rende，WANG Shubao， et al. Application of hydraulic jet annular fractiaring technolog in Changqing Oilfleld［J］. Drilling & Production Technolog， 2015，38（1）：48-50. Google Scholar
[15]	[15] 张全胜，李明，张子麟，等.胜利油田致密油储层体积压裂技术及应用［J］.中国石油勘探，2019，24（2）：232-240. Google Scholar ZHANG Quansheng，LI Ming，ZHANG Zilin， et al. Application of volume fracturing technology in tight oil reservoirs of Shengli Oilfield［J］. China Petroleum Exploration， 2019，24（2）：232-240. Google Scholar